Membrane Air Spring - DMAS-BL1
| Article Information |
Dynemech DMAS system consists of three master pneumatic isolators for 3-point precision levelling. Each pneumatic damping isolator consists of a self-levelling plunger mechanism, which is the load sensing, and height-controlling element. The system is supplied with pressure regulator, distributor, non-return valve and other pneumatic accessories necessary for complete systems installation. Clean dry air is required to be supplied to the system.
The DMAS is lightweight aluminium body. The inner chamber is split into two parts i.e. load volume and damping volume. Damping up to 20% can be adjusted using external valve manually. A thin reinforced elastomeric diaphragm supports the load. A safety valve protects diaphragm from over inflation. The final precise levelling of the system can be done using levelling nut provided on the plunger mechanism.
Available levelling accuracies are ± 0.015 mm and ± 0.15 mm depending upon the application requirements.
Natural frequency of the DMAS system is 2.5-3 Hz.
Application:
Membrane air springs are used for high precision measuring and testing machines like CMM, Gear Profile Testers, Microscopes, Hardness Testers, Surface Roughness Measuring equipments etc. |
| Type:Membrane Air Springs |
| Name:DMAS-BL1 |
| Technical Data |
|
D (mm):200
|
|
d (mm):170
|
|
H (mm):155
|
|
L (mm):293
|
|
Load Capacity At 4 bar (Kg):800
|
|
Load Capacity At 6 bar (Kg):1200
|
|
Self Leveling Repeatability (mm):±0.150
|
|
Natural Frequency Vertical (mm):2.5-3
|
|
Weight Apprx. (Kg):9
|
